Light Industrial

Light Industrial Positions.

New For
September 2021
REQUIREMENTSRATE/HRLOCATIONHOW TO APPLY
Light AssemblyOur Client an automated Sprinkler system manufacturer is looking for light machinery assembly line workers.
Location: Concord – Langstaff and Jane – not bus accessible
Shift: 6am-2pm
Rate: $20/hr
Will Training is provided. Sitting, standing and walking is required to physically perform the position.
WHAT THEY ARE LOOKING FOR:
· Experience using hand tools required
· Strong mechanical aptitude
. Attention to Detail, following instructions
· Ability to think critically and problem solve and work under pressure/meet deadlines
· Experience working with drawings
· Ability to collaborate with a team
· An understanding of hydraulics is an asset
· Experience with lean methodology is an asset
Sitting, standing, and walking is required. Attention to detail, following instructions, working under pressure on an assembly line, handling of assembly tools is required. Training is provided.
If you are interested any of the above positions, we invite you to come and register in our office. At time of interview, please bring in your resume, Photo ID & SIN card at time of application. We will be accepting applications: Monday to Friday between 9am-3pm.
Front Line Work Force Inc 2077 Dundas St E Unit 202 Mississauga, ON L4X1M2
(2 lights west of Hwy 427, across the street from Leon's)

$20.00/hr
Days 6am -2pm
Woodbridge/VaughanE-mail
General Labour-Dry BlendsOur client is recognized as Canada’s leading food ingredient supplier, distributing a wide range of raw materials for the food and personal care market and specializing in the manufacture of antioxidants, release agents, bakery concentrates, dough conditioners and vitamin and mineral enrichment blends.

Pay Rate: $16.50/hr
Shift: Monday-Friday 7:00am-3:30pm
Major Intersection: Creditview and Derry
Job Description:
• Will be helping “cut and dump” bags of dry ingredients which requires lifting up to 50lbs regularly
• Will assist with packaging, lifting boxes on skids, making boxes – all duties may be required at different times
• Should be ok with repetitive lifting, working in their feet for long periods
• Must wear all safety equipment that is provided here
• Experience with an RF scanner/gun is an asset
• basic knowledge of computers
• reading and writing skills required, some paperwork to be completed
• Should have a good attitude and flexible to work with a diverse team
• All other duties as assigned by supervisor
• Safety shoes mandatory; proper dress attire is long pants and t-shirt unless otherwise stated

At Front Line Work Force Inc., we offer Competitive Pay, Weekly Pays, Weekly Paid Vacation Pay, Direct Deposit & Benefits are available. If you are interested in any of the above position, please bring in your resume, Photo ID & SIN card at time of application. We will be accepting applications Monday to Friday between 9am-3pm. FRONT LINE WORK FORCE INC 2077 Dundas St East Unit 202 Mississauga Ontario L4X1M2 (2 sets of lights west of Hwy 427, across the street from Leon's)

$16.50/hr
Day Shift
Mississauga
Creditview and Derry
E-mail
Raymond Reach Narrow aislePay Rate: $18.00/hr

Major Intersection: Hwy 50 & Mayfield Rd

Hours of Work: Monday – Friday 4:00pm-12:00am


GENERAL DUTIES & RESPONSIBILITIES

• Unload trailers, review documentation and perform a visual inspection on all receipts.
• Verify inbound quantities against vendor supplied paperwork, and report any discrepancies to the Supervisor.
• Pick and prepare all customer orders for shipping.
• Prepare and stage the appropriate product for shipment and load the trailer.
• Prepare and verify all outbound documentation as required.
• Maintain the cleanliness of the warehouse areas.
• Ensure compliance to all company policies/practices and reports all unsafe activities, procedures, or conditions to a Manager or Health and Safety Representative.
• Assist the Warehouse Supervisor and Manager as required.
• Perform any other duties as required.

KNOWLEDGE, EXPERIENCE & EDUCATION

• Preferred High School Diploma and/or experience in a mid-sized company with warehousing and material handling skills.
• Must be proficient in written & spoken English.
• Experience in the operation of forklift truck. Cherry picker or Order picker forklift experience is an asset
• Must have or be able to successfully complete forklift driver’s certification immediately upon hire.

TECHNICAL SKILLS

• Operating knowledge of personal computer and printers.
• Must have the skills and ability to keep all lines of communication open with Supervisors, Managers, and co-workers.


PHYSICAL DEMANDS

• The physical requirements are standing, walking, climbing, and sitting, with 90% of working hours spent in the warehouse and mezzanine areas. This position also requires the ability to reach, grasp, bend and flex arms, legs, wrists and fingers, and should be comfortable lifting 40 – 55 lbs.



At Front Line Work Force Inc., we offer Competitive Pay, Weekly Pays, Weekly Paid Vacation Pay, Direct Deposit & Benefits are available. If you are interested in any of the above position, please bring in your resume, Photo ID & SIN card at time of application. We will be accepting applications Monday to Friday between 9am-3pm. FRONT LINE WORK FORCE INC 2077 Dundas St East Unit 202 Mississauga Ontario L4X1M2 (2 sets of lights west of Hwy 427, across the street from Leon's)

$18.00/hr
Afternoon shift
Bolton
Hwy 50 & Mayfield Rd
E-mail
Industrial Spray PainterRoles & Responsibilities: (this is not inclusive list, other duties may be assigned at the discretion of management.)

• Sprays surfaces of manufactured products, or working area with protective material, such as paint, enamel, glaze, and using spray gun;
• Inspects surface conditions prior to painting, ensuring there are no defects and the products is clean and ready for painting;
• Cleans grease and dirt from product, using materials, such as lacquer thinner, turpentine, soap and eater;
• Applies masking tape over parts and areas that not to be coated;
• Selects and mixes coating liquid to produce desired colour, according to specifications, using paddle or mechanical mixer;
• Pours coating liquid into spray container and connects gun to air hose, using wrenches;
• Turns sprayer valves and nozzle to regulate width and pressure of spray according to knowledge of painting technique;
• Pulls trigger and direct spray onto work surface to apply prim or finish coat;
• Coats area inaccessible to hand sprayer, using brush;
• Cleans spraying equipment and brushes with solvent;
• May use wire brush or steel wool to remove rust from metal;
• Comply with all company policies, procedures, and programs

Health and safety;

• Work SMART and work SAFE – follow all company policies and procedures;
• Must wear the proper PPE as per company policy;
• Housekeeping – ensure proper storage of all tools area is kept clean and tidy; no slip trip or fall hazards are present, and all materials are stored in a proper container/cabinet;
• Ensure that the equipment is in proper working order, if applicable conduct pre and post work inspections on tools/equipment

Knowledge, Skills, and Abilities;

• Excellent communication skills both written and verbal;
• Able to take direction both oral and written;
• Highly organized, well planned, productive, self-directed individual who requires minimal supervision, and is able to meet tight production timelines;
• Excellent problem solving/analytical skills, possess the ability to make decision and to influence others;
• Intermediate mathematical skills is required;
• You collaborate with others in order to achieve the best results and deliver the most value
• Ability to operate hoist and lifting equipment, prepare jigs;
• Ability to use general assembly tools – impact gun, torque wrench, etc.;
• Willing to work in a team environment, possess solid work ethic, and pays attention to detail;
• You collaborate with others in order to achieve the best results and deliver the most value

Qualifications;

• Hoist & Lift truck experience certified. Counter balance Propane, Walkie
• High school diploma or equivalent is required;
• 3-5 Years previous experience of automotive or industrial paint shops;
• 2-3 years of experience missing variation of colours and the ability to spray balance colours;
• 3-5 years’ experience of working with two part component paint system i.e. system pressures, gauges etc;
• Previous experience working in a production environment

Working Environment;
The physical environment requires the employee to work both inside heat.cold, humid, and dry.arid conditions. Must use personal protective equipment to prevent exposure to elements such as dust, fumes, noise and odours. This position may include lifting up to 50lbs at times. Stand long periods of time, bend, twist, and reach (overhead, waist level) from floor. May be requested to work overtime and weekends.

$18.00-20.00/hrTomken & Timberlea
Mississauga
E-mail
CNC Operator/ProgrammerIMMEDIATE POSITION

CNC Programmer and Operator

LOCATION: Tomken & Timberlea – Mississauga Ontario

PAY RATE: $30-$32/hr

Key Job Responsibilities and Accountabilities
Read and interpret drawings
Program, set-up and Operate CNC Machines
Design, select and set up proper tooling, holding fixtures and attachments
Calculate proper operating conditions (speed/feeds) and tooling for the job
Ensure that machined parts conform to specifications.
Use precision gauges and measurement instruments
Knowledge of “G & M” codes with programming/editing skills
Ability to independently set up CNC Machinery
Prioritize daily inventory list to be physically counted
Identify and implement corrective measures on variances

Educational/Experience Requirements
Post-secondary education preferred
Proficient in the use of MS Office and standard software (Lotus Notes and JDE preferred)
Must have a valid forklift license with a minimum of 3-5 years experience operating a counter balance lift truck.
General physical activities, with the ability to lift up to 70 lbs.
Excellent interpersonal with superior communication skills; both verbal and written
Well organized, well-planned, productive, self-directed individual who requires minimal supervision and can make timely decisions
General machinist certificate or related work experience


Minimum 3-5 years work experience setting up and operating CNC Milling machinery and tools

Minimum 3-5 years of work experience creating programs in CAM software (Mastercam or similar)

Ability to read & interpret blue prints, drawings, charts & tables
Previous experience working with overhead cranes an asset
Proficient in the use of MS Office and standard software (Lotus Notes and JDE preferred)

General physical activities, with the ability to lift up to 70 lbs.
Excellent interpersonal with good communication skills; both verbal and written
Well organized, well-planned, productive, self-directed individual who requires minimal supervision and can make timely decisions
$30-$32.00/hrTomken & Timberlea
Mississauga
E-mail
WelderWELDER

Location: Tomken & Timberlea – Mississauga

Pay Rate: $22-23/hr

Roles & Responsibilities: (this is not inclusive list, other duties may be assigned at the discretion of management.)


• Read and interpret blueprints and/or drawings to determine the specific welding requirements;
• Determine the appropriate welding equipment or method based on requirements;
• Set up components for welding according to specification (E.g. cut material with powered saws to match measurements);
• Removes rough spots from work piece, using portable grinder, hand file, or scraper;
• Mig Weld – aluminum and steel components based on specifications of the blueprints and/or drawings;
• Align components using calipers, rulers, etc., and clamp pieces;
• Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead);
• Test and inspect welded surfaces and structures ensuing quality standards are met;
• Ensure work is done safely and meets quality standards;
• Provide a great level of attention to detail and focus on given task ;
• Comply with all company policies, procedures, and programs

Health and safety;

• Work SMART and work SAFE – follow all company policies and procedures;
• Must wear the proper PPE as per company policy;
• Housekeeping – ensure proper storage of all tools area is kept clean and tidy; no slip trip or fall hazards are present, and all materials are stored in a proper container/cabinet;
• Ensure that the equipment is in proper working order, if applicable conduct pre and post work inspections on tools/equipment

Knowledge, Skills, and Abilities;

• Excellent communication skills both written and verbal;
• Able to take direction both oral and written;
• Highly organized, well planned, productive, self-directed individual who requires minimal supervision, and is able to meet tight production timelines;
• Excellent problem solving/analytical skills, possess the ability to make decision and to influence others;
• Intermediate mathematical skills is required;
• You collaborate with others in order to achieve the best results and deliver the most value
• Ability to operate hoist and lifting equipment, prepare jigs;
• Ability to use general assembly tools – impact gun, torque wrench, etc.;
• Willing to work in a team environment, possess solid work ethic, and pays attention to detail;
• You collaborate with others in order to achieve the best results and deliver the most value

Qualifications;

• CWB certification is preferred with a 3-5 years of experience in a manufacturing environment;
• Experience with steel, aluminum and/or stainless steel required;
• Experience with MIG welding highly preferred
• Knowledge of machine and tools, including their designs and uses;
• Ability to read blueprints, drawings, calipers, tape measures and angle gauges
• Ability to perform intermediate math, convert decimals to factional equivalents and fractions to decimal equivalents;
• Ability to stand continuously for long periods of time;
• Exposure to or have worked in an environment where Lean/Six Sigma principals were practiced

Working Environment;
The physical environment requires the employee to work both inside heat.cold, humid, and dry.arid conditions. Must use personal protective equipment to prevent exposure to elements such as dust, fumes, noise and odours. This position may include lifting up to 50lbs at times. Stand long periods of time, bend, twist, and reach (overhead, waist level) from floor. May be requested to work overtime and weekends.


Major Intersection: Tomken Rd& Courtney Park Dr East

Hours of Work: Monday-Friday 8:00am-4:30pm



Requirements:

• Able to lift up to 40 pounds
• Attention to Detail
• Good communication skills
• Excellent hand and eye coordination

At Front Line Work Force Inc., we offer Competitive Pay, Weekly Pays, Weekly Paid Vacation Pay, Direct Deposit & Benefits are available. If you are interested in any of the above position, please bring in your resume, Photo ID & SIN card at time of application. We will be accepting applications Monday to Friday between 9am-3pm. FRONT LINE WORK FORCE INC 2077 Dundas St East Unit 202 Mississauga Ontario L4X1M2 (2 sets of lights west of Hwy 427, across the street from Leon's)
$22-$23.00/hr /hrMississauga
Tomken Rd& Timberlea Blvd
E-mail
Raymond Reach OperatorOur client is a leading OAKVILLE based; fast growing company with a specialty in manufacturing hydrogen peroxide based disinfectants is looking for key people who want to join a production team. With opportunity for advancement, a competitive compensation and benefits structure, this could be the opportunity to take your career to a new level.

Position will be a Raymond Reach Operator with Order Picking

Pay Rate: $18.00/hr

Hours of Work: Monday to Friday 7:00am to 3:30pm

Major Intersection: Winston Churchill and QEW

Responsibilities:
• Candidate needs to have at least 3 years of solid Raymond Reach and Walkie experience.
• Candidate needs to have solid RF Scanner experience.
• Candidate must have strong organization skills and the ability to plan and self-manage
• Order picking experience and experience working with racking is desired.
• Ability to unload trailers as needed.
• Ability to lift up to 50 lbs
• Repetitive work bending, twisting, standing for long periods of time
• All other duties as assigned by supervisor
• Safety shoes mandatory; proper dress attire is long pants and t-shirt unless otherwise stated

At Front Line Work Force Inc., we offer Competitive Pay, Weekly Pays, Weekly Paid Vacation Pay, Direct Deposit & Benefits are available. If you are interested in any of the above position, please bring in your resume, Photo ID & SIN card at time of application. We will be accepting applications Monday to Friday between 9am-3pm. FRONT LINE WORK FORCE INC 2077 Dundas St East Unit 202 Mississauga Ontario L4X1M2 (2 sets of lights west of Hwy 427, across the street from Leon's)

$18.00/hrMississauga
Dundas/WinstonChurchill Dr
E-mail
Machinist Machinist

Location: Tomken & Timberlea – Mississauga

Day Shift: 7am-3:15pm Monday – Friday some overtime and weekends required at times.
Pay Rate: $22-23/hr

Roles & Responsibilities: (this is not inclusive list, other duties may be assigned at the discretion of management.)


• Verify dimensions or tolerances, using instruments such as micrometers or vernier calipers;
• Machine parts to specifications in accordance with engineering drawings, using machine tools, such as lathes, milling machines, shapers, or grinders;
• Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations;
• Measure, examine or test completed units to check for defects and ensure conformance to specifitions, using precision instruments, such as micrometers;
• Diagnose machine tool malfunctions to determine need for adjustment or repairs;
• Check output to ensure consistency with specifications and discard defects;
• Dispose of scrap or waste and related materials for reuse, recycling or disposal
• Lay out, measure, and mark metal stick or display placement of cuts;
• Evaluate machining procedures and recommend changes or modifications for improved efficiency or adaptability;
• Perform routine machine maintenance and repair minor damages;
• Comply with all company policies, procedures and programs

Health and safety;

• Work SMART and work SAFE – follow all company policies and procedures;
• Must wear the proper PPE as per company policy;
• Housekeeping – ensure proper storage of all tools area is kept clean and tidy; no slip trip or fall hazards are present, and all materials are stored in a proper container/cabinet;
• Ensure that the equipment is in proper working order, if applicable conduct pre and post work inspections on tools/equipment

Knowledge, Skills, and Abilities;

• Excellent communication skills both written and verbal;
• Able to take direction both oral and written;
• Highly organized, well planned, productive, self-directed individual who requires minimal supervision, and is able to meet tight production timelines;
• Excellent problem solving/analytical skills, possess the ability to make decision and to influence others;
• You collaborate with others in order to achieve the best results and deliver the most value
• Ability to operate hoist and lifting equipment, prepare jigs;
• Ability to use general assembly tools – impact gun, torque wrench, etc.;
• Willing to work in a team environment, possess solid work ethic, and pays attention to detail;
• You collaborate with others in order to achieve the best results and deliver the most value
• Exposure to or have worked in an environment where lean/Six Sigma principles were practiced.

Qualifications;

• High school diploma/ GED and certificate in Machining is a must.
• Minimum 5 years of experience using and/or programming manual, semi-automated or automated tools and machines ( radial drilling, lathes grinders etc.)
• Ability to use precision tool (e.g. calipers) take measurements
• Knowledge of properties of metal and other material
• Intermediate mathematical skills required
• Excellent communication skills both written and verbal;

Working Environment;
The physical environment requires the employee to work both inside heat.cold, humid, and dry.arid conditions. Must use personal protective equipment to prevent exposure to elements such as dust, fumes, noise and odours. This position may include lifting up to 50lbs at times. Stand long periods of time, bend, twist, and reach (overhead, waist level) from floor. May be requested to work overtime and weekends.

$22-$23.00/h
Tomken & Timberlea Blvd.
Mississauga
E-mail
General Labour
Mfg. Visual Display products
Rate of Pay: $17.00/hr

Shift Hours: Monday-Friday 7:00am-3:30pm
Monday-Friday 2:00pm-10:30pm


The Production Operator is responsible for providing assistance to the production staff in completing their assigned tasks.

Responsibilities:
• Operate all equipment in a safe and efficient way according to all relevant legislation, policies and procedures.
• Operate basic hand tools such as saws and drills. Safely use shop machinery such as a press, shearer and decoyer.
• Assemble materials to create final products using above mentioned tools and machines.
• Lift and carry merchandises as needed.
• Load and unload materials from delivery trucks.
• Packing, wrapping, labeling, and/or shipping products. Maintain shipping and receiving logs and makes sure that incoming and outgoing products and material are in good condition.
• Provide manual labour assistance on various tasks as assigned.

Physical Requirements:
This position requires a moderate to high degree of standing, walking, stooping or kneeling, close eye work, reaching, pulling or pushing. Good hand dexterity, hearing, and vision are considered essential. A moderate to high degree of repetitive motions using right, left, or both hands and/or feet may also be required. Requires wearing personal protective equipment. Requires working indoors in environmentally non-controlled conditions (wood working environment, wood dust, poly plastic dust). Includes responsibility for the health and safety of others.

Skills:
• Ability to communicate effectively in English.
• Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
• Ability to read and understand equipment operation manuals, Safety Data Sheets, and other literature as required.
• Basic computer knowledge preferred.
• Good mathematics skills
• Troubleshooting
• Critical Thinking/Problem solving
$17.00 /hr
Days or Afternoons
Temp to perm, Full benefits after hire + after 6 mths you can participate in company pension plan
West Mississauga
Dundas/Winston Churchill
In person
Mon - Fri 9am-3pm
E-mail
Warehouse HelpIntersection: Kennedy and Steeles

Pay Rate: $16.00/hr
Hours of Work: Monday-Friday 5:00am-1:30pm

Job Description:
• Receiving of good – 1 truck from Pennsylvania every night, unloading caskets (simple process),
• stocking Inventory
• load/unload containers
• computer skills for inventory control
• some assembly – using power screw driver.
• Ability to use or learn to use a walkie – prepping orders

$16.00/hrBrampton
Steeles/Kennedy
In person
Mon - Fri 9am-3pm
E-mail
General Labourer / Packer Pay Rate: $15.50/hr

Hours of Work: Monday-Thursday 7:00am-5:30pm

Major Intersection: Winston Churchill and QEW

Responsibilities:
• Lifting boxes at the end of the line approximately 30-50lbs
• Packing /unpacking
• Labeling
• Unloading and loading
• Individual must be able to multi-task various duties
• Punctuality and attendance is important
• Repetitive work bending, twisting, standing for long periods of time
• All other duties as assigned by supervisor
• Safety shoes mandatory; proper dress attire is long pants and t-shirt unless otherwise stated



Qualifications

• Command of the English language, both written and verbal.
• Ability to lift up to 50lbs on a regular basis.
• Ability to work in a fast paced, high volume environment.
$15.50/hrWest Mississauga
Dundas/Winston Churchill
In person
Mon - Fri 9am-3pm
or email resume to E-mail
Production WorkerOur client is recognized as Canada’s leading food ingredient supplier, distributing a wide range of raw materials for the food and personal care market and specializing in the manufacture of antioxidants, release agents, bakery concentrates, dough conditioners and vitamin and mineral enrichment blends.
Pay Rate: $18.00/hr
Shift: Monday-Friday 7:00am-3:30pm
Major Intersection: Creditview and Derry
Job Description:
• Will be helping “cut and dump” bags of dry ingredients which requires lifting up to 50lbs regularly
• Will assist with packaging, lifting boxes on skids, making boxes – all duties may be required at different times
• Should be ok with repetitive lifting, working in their feet for long periods
• Must wear all safety equipment that is provided here
• Experience with an RF scanner/gun is an asset
• basic knowledge of computers
• reading and writing skills required, some paperwork to be completed
• Should have a good attitude and flexible to work with a diverse team
• All other duties as assigned by supervisor
• Safety shoes mandatory; proper dress attire is long pants and t-shirt unless otherwise stated
$18.00/hr
West Mississauga
Major Intersection: Creditview and Derry
E-mail
Production AssistantIntersection: Kennedy and Matheson
Pay Rate: $16.00/hr
Hours of Work:
(Day Shift) Monday-Friday 6:00am-2:00pm
(Afternoon Shift) Monday-Friday 2:00pm-10:00pm
(Night Shift) Monday- Friday 10:00pm-6:00am
Job Description:
• Must be able to work different shifts and occasional overtime
• Pack and strap material as per customer requirements.
• Able to assist machine operators.
• Able to do lifting (20lbs - 50lbs)
• Must be able to work in a hot environment
• Repetitive work bending, twisting, standing for long periods of time
• All other duties as assigned by supervisor

Key requirements
Work Experience • 1-2 years of Production Helper experience
• Extrusion/Manufacturing experience desirable
Education • High School
Functional Knowledge • Able to pack and strap material as per customer requirements
• Able to assist machine and saw operators
• Basic math skills
Technical Knowledge • Able to meet Health and Safety requirements
Language • Able to communicate effectively
People Management • Ability to work with a team and independently


$16.00/hr
Days/Aft/Nights
Kennedy/MathesonE-mail
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
E-mail
In person
Mon - Fri 9am-3pm
E-mail
In person
Mon - Fri 9am-3pm
E-mail
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm or
E-mail
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm

In person
Mon - Fri 9am-3pm
or email resume to E-mail
In person
Mon - Fri 9am-3pm or
E-mail
E-mail
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
E-mail
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm or E-mail
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
E-mail
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm
In person
Mon - Fri 9am-3pm